A furnace making a loud noise is usually telling you which part is in trouble. A bang or boom when it starts often means delayed ignition from dirty burners.
A squeal or screech points to the blower motor or its belt. Rattling is often a loose panel or a loose part inside.
A loud hum or buzz is usually electrical. Some of these are minor. A boom on startup is not, and it needs furnace repair before the next cold night.
Here is a noise-by-noise guide.
Normal furnace sounds
Not every sound is a problem. A healthy furnace makes a few:
A click when the thermostat calls for heat.
A soft whoosh as the burners light.
The steady hum of the blower.
Ticking or popping from the ductwork as the metal heats and cools.
If your furnace has always sounded like this, you are fine. What matters is a new sound, a louder sound, or one that shows up every time it starts.
Banging or booming when it turns on
This is the one to take seriously. The usual cause is delayed ignition. Gas flows into the burners, but dirty burners or a weak igniter keep it from lighting right away. Gas builds up for a second, then lights all at once with a small bang. Over time, those little explosions can crack the heat exchanger.
If you hear a boom at startup, turn the furnace off at the thermostat and call. Do not keep running it.
A single bang after the blower shuts off can also be the ductwork flexing as it cools, especially in older metal ducts. That is less serious, but it is worth mentioning when a tech is out.
Squealing or screeching
A high-pitched squeal usually comes from the blower.
Older furnaces with a belt-driven blower squeal when the belt is worn, loose, or slipping.
Newer furnaces with a direct-drive motor squeal when the motor bearings are wearing out.
A worn belt is a quick, inexpensive fix. A failing blower motor will eventually stop, and when it does, the furnace will not deliver heat. Catching it while it only squeals is cheaper and less stressful than waiting.
Rattling
Rattling can be as simple as a loose access panel or a screw backing out. Check that the furnace doors are seated and the screws are snug.
If the rattle is coming from inside the cabinet, it could be a loose blower wheel, a motor mount, or something more serious, like a cracked heat exchanger. Since a cracked heat exchanger can leak carbon monoxide, an inside rattle is worth having a tech look at. Make sure your CO detectors are working in the meantime.
Scraping or grinding
Metal on metal is never good. It usually means the blower wheel has come loose and is hitting the housing, or the motor bearings have failed. Turn the furnace off and call. Running it can turn a repair into a replacement of the whole blower assembly.
Humming or buzzing
A blower always hums a little. A loud hum or an electrical buzz is different. Common causes are a failing capacitor, a motor struggling to start, a loose wire, or a transformer going bad. Electrical problems can get worse quickly. If the hum is loud, new, or comes with a burning smell, shut the furnace off at the breaker and call.
Whistling
A whistle usually means air is being forced through a small gap. The most common causes are a clogged filter, closed or blocked vents, or a leak in the ductwork. Start by replacing the filter and opening the vents. If it still whistles, the ducts may need attention.
Clicking that does not stop
One click at startup is normal. Repeated clicking with no flame means the furnace is trying to light and failing. That points to the igniter, the flame sensor, or the gas supply. If the furnace keeps clicking and shutting off, you may also notice it short cycling.
Most of these noises do not fix themselves. If yours is new, louder than it used to be, or shows up every time the furnace runs, schedule service and we will track it down and give you an honest answer on whether it needs fixing now or can wait.
When to shut it off and call right away
A boom or bang when the burners light.
Grinding or scraping metal.
A loud buzz with a burning or electrical smell.
Any noise with a smell of gas. Leave the house first and call the gas company from outside.
Your carbon monoxide detector goes off.
For a no-heat night, our emergency heating repair page has the details.
How to keep a furnace quiet
Dirty burners, worn belts, and failing motors all show up during a furnace maintenance and tune-up before they turn into a loud noise in January. Our post on what happens during a furnace tune-up walks through the checklist. You can also see all our heating services.
Frequently asked questions
Why does my furnace make a loud bang when it turns on?
Usually delayed ignition. Gas builds up before the burners light, then ignites all at once. It is often caused by dirty burners or a weak igniter and should be fixed soon, since it can damage the heat exchanger.
Why is my furnace squealing?
A squeal usually comes from a worn or loose blower belt on older furnaces, or failing motor bearings on newer ones.
Is it safe to run a noisy furnace?
It depends on the noise. Normal clicks and hums are fine. Booms, grinding, loud electrical buzzing, or any noise with a gas smell mean you should shut it off and call.
Why does my furnace rattle?
A loose panel or screw is the simple answer. A rattle inside the cabinet can mean a loose blower part or a cracked heat exchanger and should be checked.
Can a dirty filter make my furnace noisy?
Yes. A clogged filter can cause whistling and makes the blower work harder, which can add to the noise.
A new noise is the cheapest warning your furnace will ever give you. Call Pilgrim at 918-366-3040 or book a furnace check online and get it looked at before it gets worse.